coils in brake lines near master cylinder
11-18-2009, 06:56 PM
#1
Chapter President
Thread Starter
coils in brake lines near master cylinder
do these have a purpose and do i need to remake them them bending new lines? if so how precise must they be?
11-18-2009, 07:56 PM
#2
1st Generation Admin
- The cab of the truck floats on rubber mounts, independently from the frame of the truck.
- The master cylinder is mounted to the cab's firewall.
- The brake distribution lines are mounted to the frame.
Those coils of pipe allow the two (cab/frame) to move about without stretching/breaking the lines that connect the two (master cylinder / frame mounted brake lines).
Make sense?
Replacements don't have to be pretty.
- The master cylinder is mounted to the cab's firewall.
- The brake distribution lines are mounted to the frame.
Those coils of pipe allow the two (cab/frame) to move about without stretching/breaking the lines that connect the two (master cylinder / frame mounted brake lines).
Make sense?
Replacements don't have to be pretty.
Thread
Thread Starter
Forum
Replies
Last Post
mstep3
2nd Gen. Dodge Ram - No Drivetrain
44
01-18-2010 09:01 AM
Gen414
3rd Gen Engine and Drivetrain -> 2003-2007
2
05-07-2009 11:08 AM
cgmorgan06
3rd Gen Engine and Drivetrain -> 2007 and up
3
11-15-2007 04:02 PM
steven
3rd Generation Ram - Non Drivetrain - All Years
2
08-11-2006 06:18 PM