Center Floor Console
#1
Registered User
Thread Starter
Center Floor Console
I want cup holders! I though installing a center floor console would work pretty slick. I could have cup holders, gauges, a phone dock, extra insulation to block noise, and maybe speakers (I hate how beat they get in the doors). Most of the aftermarket pieces don't really fit my need since I already have 2nd Gen seats with a center console. After lots of Google image searching, I came up with this:
http://www.classictruckconsoles.com/...lbenchseat.htm
I think this could fit the bill; however, I wanted to see if anyone else already had a better option.
Thanks guys!
http://www.classictruckconsoles.com/...lbenchseat.htm
I think this could fit the bill; however, I wanted to see if anyone else already had a better option.
Thanks guys!
#2
well I don't know about doing a whole center console but this is how I done the drink holders in both my trucks. I used genos garage 94 to 98 drink holders in both trucks. my first gen it slipped under the seat and sits right on the trans hump with a couple short screws in the hump
on the second gen I installed it just like its supposed to be. it just sits in the pocket in the middle console and the lid still closes good.
these are by far the best drink holders I have ever used, they have deep pockets so the drinks don't spill and they fit pretty much every size you can think of. let us know how it turns out!
on the second gen I installed it just like its supposed to be. it just sits in the pocket in the middle console and the lid still closes good.
these are by far the best drink holders I have ever used, they have deep pockets so the drinks don't spill and they fit pretty much every size you can think of. let us know how it turns out!
#6
Banned
THISS Being that you have a second gen seat look
http://www.genosgarage.com/DODGE-RAM...P-HOLDER-9802/
http://www.genosgarage.com/DODGE-RAM...P-HOLDER-9497/
Geno's garage sell's theses and they fit really nice and there great People to deal with .
http://www.genosgarage.com/DODGE-RAM...P-HOLDER-9802/
http://www.genosgarage.com/DODGE-RAM...P-HOLDER-9497/
Geno's garage sell's theses and they fit really nice and there great People to deal with .
#7
Sent from my DROID4 using Tapatalk 2
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rolling18
3rd Generation Ram - Non Drivetrain - All Years
2
11-19-2010 06:35 PM
p0wd3rp1l0t
3rd Generation Ram - Non Drivetrain - All Years
13
09-13-2009 04:47 PM
Dalbery
3rd Generation Ram - Non Drivetrain - All Years
6
12-19-2006 03:54 PM