Casting #'s on Turbos
#1
Registered User
Thread Starter
Join Date: Jan 2003
Location: Naperville, IL
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Casting #'s on Turbos
I found some turbos on ebay, but they look HUGE, like way too big for our trucks. Can anyone tell me if either of these would even fit, and/or work well on my 89?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2464469491
and
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2464464985
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2464469491
and
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2464464985
#4
Registered User
Join Date: Dec 2003
Location: San Marcos, TX
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
RedWhite... Your best bet would be any Holset HX series...
the number after the "HX" gives you an idea of the size of the turbine outlet flange...
for example:
HX35=3.5"
HX40=4.0"
HX50=5.0"
& so on...
These turbos are the most popular, so they are easy to get your hands on them...
The big dawg 50, 60, 70, 80 series turbos are just too much turbo for a street driven 5.9.
the number after the "HX" gives you an idea of the size of the turbine outlet flange...
for example:
HX35=3.5"
HX40=4.0"
HX50=5.0"
& so on...
These turbos are the most popular, so they are easy to get your hands on them...
The big dawg 50, 60, 70, 80 series turbos are just too much turbo for a street driven 5.9.
Thread
Thread Starter
Forum
Replies
Last Post
dditt0635004x4
3rd Gen High Performance and Accessories (5.9L Only)
13
02-07-2007 12:36 PM
BigBlackBeast05
3rd Gen High Performance and Accessories (5.9L Only)
1
07-24-2005 09:47 PM