Carrier Bearing Part #?
#2
I'm not sure, but I went to my local driveline spicer specialist and they sold me the whole carrier bearing/bushing bracket unit and it was relatively cheap and HUGE too.
#3
Registered User
Thread Starter
Join Date: May 2004
Location: Weatherford, TX
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Thats what I got was the whole thing. The old one, we had to pry off the shaft till it steped down in size alittle. But where it steps back up for the splines, it slid over. The new one doesn't even fit over the splines.
#4
Registered User
Thread Starter
Join Date: May 2004
Location: Weatherford, TX
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
I found it. Its HB88508-A. Ended up having to get it from NAPA for more than double the price! The 1st one has an 1.3?? center, the one on my truck is 1.578.
Thread
Thread Starter
Forum
Replies
Last Post
ajb1974
3rd Gen Engine and Drivetrain -> 2003-2007
4
03-18-2015 05:49 PM
displacedtexan
12 Valve Engine and Drivetrain
7
03-17-2008 07:04 PM
Joseph H. Smith
12 Valve Engine and Drivetrain
16
01-06-2007 08:13 PM