Bent the adjuster tube....
#16
Registered User
Go here:
http://www.offroaddesign.com/catalog.htm
I called them up and they indicated that they have tubes in various wall thicknesses available, as well as options for larger end diameters.
She told me $85 for one with 1/4" wall and, I believe, a stock thread size.
Mark.
http://www.offroaddesign.com/catalog.htm
I called them up and they indicated that they have tubes in various wall thicknesses available, as well as options for larger end diameters.
She told me $85 for one with 1/4" wall and, I believe, a stock thread size.
Mark.
#17
Registered User
Thread Starter
Join Date: Jul 2010
Location: victoria bc
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
So thanx again for all advice. I managed to get it off and I straightened it at a blacksmiths shop on a pipe bender. ( don't worry, I didn't heat it up)
Got it as close to straight as possibly. And now I think I'll try and reinforce it by clamping on angle iron
Got it as close to straight as possibly. And now I think I'll try and reinforce it by clamping on angle iron
Thread
Thread Starter
Forum
Replies
Last Post
CarBizIndio
2nd Gen. Dodge Ram - No Drivetrain
8
10-02-2007 01:43 PM