Back to stock?
#1
Registered User
Thread Starter
Back to stock?
Does anyone know if our pumps can be set back to or atleast close to stock settings. Like is there a way to measure by counting turns in screws from bottoming out to the setting... basically like setting high and low on a lawn mower carborator.
I wanna turn the pump back to staock and tweak to where I want it. When I got the truck the pump was already tampered with. The tamper proof collar was already removed (saved me time). I recorded my ajustments from where to pump was originally set up for when I was pulling. Now I'd like to do the adjustments for myself from stock if possible.
I wanna turn the pump back to staock and tweak to where I want it. When I got the truck the pump was already tampered with. The tamper proof collar was already removed (saved me time). I recorded my ajustments from where to pump was originally set up for when I was pulling. Now I'd like to do the adjustments for myself from stock if possible.
#2
Adminstrator-ess
You need a pump test bench to set it to stock specs. If you really want it back to stock, take it off the truck and go to Fuel Injection in Allentown. They can set it back to stock for you - but they will probably look at you funny.
Thread
Thread Starter
Forum
Replies
Last Post
07Dually
3rd Gen High Performance and Accessories (5.9L Only)
11
03-09-2007 12:25 PM
Jordan5687
Performance and Accessories 2nd gen only
33
02-16-2007 12:37 AM
JoshPeters
General Diesel Discussion
17
04-03-2005 08:13 AM
Rumbles
3rd Gen Engine and Drivetrain -> 2003-2007
6
05-24-2004 02:26 PM