I'm so mad i got there late and missed it. The rest of the show was good too though. Looks like you did pretty good. I'll be at the one at malad on the 10th too, I'll be pullin at that one if I get all my stuff together by then, but doubt i will. If not, I'll be pullin at the one in Tremonton, Utah on the 24th of July. And yeah I should be at the one in Rexburg too. I'll be at the Malad one though even if I'm watchin. It looks like you weren't spinnin much. Looks great! nice job

 

Looks like a really good start. Needs more fuel though!

Our first hook got rained out

 

Nothing wrong with more fuel.... let her drink!

 

i got everything except a 14 head and 4 cam plate and injectors lol. it rolls the coal on the street from idle to 3500 in every gear at 35 psi. this was only 20 psi at 3000 and 600 EGT's during the pull lol. so i have no clue

 

If your egt's go high on the street somthing happened, like your throttle didn't open up or ?????, it should have been rollin coal and your egt's should have been way up there. my .02

Dar

 

You're going to have a hard time loading the Cummins up in 2nd gear low range. It wasn't lack of power that stopped you it was lack of traction and momentum,,, Try taking off in third or 4th low next time, and apologize to the clutch afterwards!

 

What gears do you have? I am assuming 3.55's? If so 1st in 4 hi is a little faster.

Those are non-ic injectors?

 

yes u are correct on the gears and sticks Captain. 1st hi is what im gunna try next, or 3rd 4 lo but i doubt 3rd 4 lo

 

take your afc out. What tire pressure did you run? and what turbo do you exactly have???

 

I have tried 3rd in 4lo with 3.55's, it doesn't work so well.

With a single disc ceramic clutch it just would not hold.

With a Southbend DD, clutch holds but it won't pull it.

http://s17.photobucket.com/albums/b7...t=Matt8000.flv

For comparison, this is the same day, just in 1st 4hi:

http://s17.photobucket.com/albums/b7...t=MattOpen.flv

This was with no AFC foot.

 

45 psi, max is 60. and basically my version of an HX35. little steeper comp wheel tho.