Anyone use Timbrens on the front?
#1
Banned
Thread Starter
Anyone use Timbrens on the front?
Just wanted to share my experience with this. I've had them on there for a couple weeks and must say I am quite impressed. This truck has the Skyjacker soft rides with 1.5 inch lift in front. They seemed a bit on the bouncy side to me. The Timbrens smooth that out quite a bit, and reduce body roll as well.
It did take a bit of extra work to get them installed properly, though. The mounts needed moved inboard about 3/4 inch to clear the shocks. I think these Nitro shocks must be thicker than stock. And of course the extra lift required an additional spacer to set them up right, "in contact" with the spring.
At any rate, a highly recommended front suspension upgrade, if anyone is considering it.
It did take a bit of extra work to get them installed properly, though. The mounts needed moved inboard about 3/4 inch to clear the shocks. I think these Nitro shocks must be thicker than stock. And of course the extra lift required an additional spacer to set them up right, "in contact" with the spring.
At any rate, a highly recommended front suspension upgrade, if anyone is considering it.
#3
Banned
Thread Starter
Should take only a few minutes for a stocker. It took all day to modify the shock mounts and fabricate adjustable spacers for mine. I was a little leery about how close they were to the shocks. In the stock location they literally about touched the shocks. Since they bulge out as they compress, that seemed like a bad thing - potentially putting lateral pressure on the lower shock tube. Maybe not a problem with skinnier shocks. My shocks are the Nitro units that go with the Skyjackers, so I thought maybe they were fatter than stock and that is what caused the fitment issue there. Dunno.
But I see you've got a 2005 model with a completely different front suspension, so my experience is probably not applicable.
But I see you've got a 2005 model with a completely different front suspension, so my experience is probably not applicable.
#5
Banned
Thread Starter
I'll get some pics up tonight or tomorrow. I did post pics of the rears here:
https://www.dieseltruckresource.com/...d.php?t=114078
That was so much more difficult I completely overlooked the fronts, which were easy in comparison.
https://www.dieseltruckresource.com/...d.php?t=114078
That was so much more difficult I completely overlooked the fronts, which were easy in comparison.
Trending Topics
#8
need more info
what are they ?? air bags ?? I like the idea !! I have been thinking about the rear springs & how I could inprove the ride with them ?? or just carry bags of cement for weight ? my wife bounces all over ,its funny to me ,but not to her !!
#9
Banned
Thread Starter
You won't notice any difference in the rear unloaded. Their intention is to only come into play under heavy load, providing a ride-levelling effect and increased stability.
The fronts OTOH, are designed to ride "in contact" with the spring, and work more-or-less all the time. The effect would probably be less noticeable with stock springs. But they really firmed up and reduced the bounce effect I was feeling with the Skyjackers. It no longer has that tendency to nose-dive over big bumps.
In either case, they must limit overall spring travel to some extent, so maybe not adviseable for an off-roader.
The fronts OTOH, are designed to ride "in contact" with the spring, and work more-or-less all the time. The effect would probably be less noticeable with stock springs. But they really firmed up and reduced the bounce effect I was feeling with the Skyjackers. It no longer has that tendency to nose-dive over big bumps.
In either case, they must limit overall spring travel to some extent, so maybe not adviseable for an off-roader.
#10
Registered User
Join Date: Jan 2006
Location: Belton, MO
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
If I remember correctly, they act like a bump stop - in that when the springs are compressed, the Timbrens cushion it so they don't compress much farther, and thus create a smoother & more stabil ride.
#11
Banned
Thread Starter
That's correct. They actually replace the stock bump stops. They are just like big honkin' bump stops that do alot more than just cushion the shock when you bottom out. They would actually prevent the truck from bottoming out under exreme load.
#13
timbrens
what is a timbrens ? I"ve never heard of them ?were do you get them ? is that a simitruck part ? what about a air bag set up on the front ?? anybody have any ideas if they might work ??
#14
Banned
Thread Starter
Look at the pics behind the link I posted higher up in the thread. I ordered mine from a place in NJ called Albany Spring. Best price I coud find after searching for awhile. I'll post pics of the fronts tonight after I get home from work. I was trying to decide between Timbrens or air bags and decided to go with Timbrens based on their simplicity and reliability. Fortunately, they seem to work pretty good as well.
#15
I see that you live is california. SIX STATES carrys them!
Thay have a display of it........at least the one up here does!
was playing around with one just the ether day when i was geting axle joints for my Jeep.