Anyone run 305/70r16 tires on alcoa wheels
08-23-2012, 04:08 PM
#1
Registered User
Thread Starter
Join Date: Dec 2005
Location: gainesville, florida
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
Anyone run 305/70r16 tires on alcoa wheels
Anyone run 305/70 r 16 tires will they fit and has anyone put them on 7" Alcoa wheels?
I am currently running 285/75/r16 on the 16x7 Alcoa wheels with 2-1/2 " skyjacker springs up front tires will sometimes rub on rubber fender wells when turning. need a new set of tires soon and thinking of Nitto Durra Grappler tires in either the 285/75/r16 or 305/70/r16.
http://www.nittotire.com/Tire/duragrappler#size
LT285/75R16 E126R 205-110 16.9 32.87 11.50 7.5-(8.0)-9.0
3750
@
80
LT305/70R16 E124R 205-040 16.9 32.79 12.56 8.0-(9.0)-9.5
3525
@
65
I am currently running 285/75/r16 on the 16x7 Alcoa wheels with 2-1/2 " skyjacker springs up front tires will sometimes rub on rubber fender wells when turning. need a new set of tires soon and thinking of Nitto Durra Grappler tires in either the 285/75/r16 or 305/70/r16.
http://www.nittotire.com/Tire/duragrappler#size
LT285/75R16 E126R 205-110 16.9 32.87 11.50 7.5-(8.0)-9.0
3750
@
80
LT305/70R16 E124R 205-040 16.9 32.79 12.56 8.0-(9.0)-9.5
3525
@
65
08-23-2012, 04:30 PM
#2
305mm wide is ~12 inches.
with your 7 inch rims you should be good to go no problem.
I ran 37x12.50R16.5 on 6" wide rims no problem as well. (but had a bit taller sidewall of course.)
with your 7 inch rims you should be good to go no problem.
I ran 37x12.50R16.5 on 6" wide rims no problem as well. (but had a bit taller sidewall of course.)
Thread
Thread Starter
Forum
Replies
Last Post
Performance & Accessories 22.5 alcoa wheels / tires ? Af adapters
ratsun
3rd Gen All Products
0
02-06-2015 08:48 PM
CaledoniaOutlaw
2nd Gen. Dodge Ram - No Drivetrain
1
05-03-2010 01:31 PM
qualitymachine
3rd Gen High Performance and Accessories (5.9L Only)
8
10-25-2008 12:50 PM
sakisaki400
3rd Generation Ram - Non Drivetrain - All Years
23
12-31-2006 10:17 PM