Anyone have a getrag 360 manual?
#31
Registered User
Join Date: Mar 2008
Location: Indianapolis, IN
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Fozzy,
I've got the manual now, some guys sent it to me.
So, if you want to PM me your email address, I can shoot that over to you.
Nice thermal expansion/contraction trick by the way.. hope it works
Avery
I've got the manual now, some guys sent it to me.
So, if you want to PM me your email address, I can shoot that over to you.
Nice thermal expansion/contraction trick by the way.. hope it works
Avery
#32
Thanks Avery, James sent it to me today.
We sometimes freeze stuff at work either by liquid nitrogen or a Sea King freezer that gets crazy cold and warm up the other item. For bearings we mostly use an induction bearing heater which works very well. An old electric fry pan with engine oil works in a pinch which can be set to 180-200F.
We sometimes freeze stuff at work either by liquid nitrogen or a Sea King freezer that gets crazy cold and warm up the other item. For bearings we mostly use an induction bearing heater which works very well. An old electric fry pan with engine oil works in a pinch which can be set to 180-200F.
#34
#36
I stumbled oupon this site,thread cause I would like to replace the input shaft bearing on my 360. I cannot remove the shaft cause it is blocked in place by the lower gear. Any insight? It is not bad but since I'm in here I would like to replace it now.
I am doing a frame/ body swap on a 91 2wd to a 91 4wd.
I am doing a frame/ body swap on a 91 2wd to a 91 4wd.
#37
Registered User
I stumbled oupon this site,thread cause I would like to replace the input shaft bearing on my 360. I cannot remove the shaft cause it is blocked in place by the lower gear. Any insight? It is not bad but since I'm in here I would like to replace it now.
I am doing a frame/ body swap on a 91 2wd to a 91 4wd.
I am doing a frame/ body swap on a 91 2wd to a 91 4wd.
#38
Registered User
Join Date: May 2008
Location: bakersfield, ca
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, can you email me the pdf getrag rebuild manual, thanks, shelby
j_d@pacbell.net
j_d@pacbell.net
#39
Registered User
hey guys, can you email me the pdf getrag rebuild manual, thanks, shelby
j_d@pacbell.net
j_d@pacbell.net
#40
Getrag Manual
Gentlemen,
I am newby when it comes to Cummins and Getrag and am needing help.
I need a manual for the Getrag transmission, it is a 92 model. any help will be appreciated.
Charles
I am newby when it comes to Cummins and Getrag and am needing help.
I need a manual for the Getrag transmission, it is a 92 model. any help will be appreciated.
Charles
#41
Registered User
Join Date: Jan 2007
Location: Richmond MO, 35 minutes east of NKC
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
I would love a copy of the manual too.
Watersjunk@hotmail.com
Watersjunk@hotmail.com
#44
getrag tranny manual
Hi , can you email me the pdf getrag rebuild manual, thanks diesel fuel hnh@volcano.net
Last edited by diesel fuel; 07-28-2008 at 10:33 PM. Reason: added email