Any other Shortbed 1/2 ton Cummins conversions?
#16
Registered User
Join Date: Nov 2001
Location: tennessee
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
i have been driving an 82 for about 7 years. torgue is awesome. drive around in high gear unless showing out. lites the tires in in high gears at will with 3.21 axle
#28
thanks ive got a hy35 on there with non-ic 6bt injectors,which do better then my edm'd 5x14 sticks.boost is 27psi.ive got a nv4500 out of a 97 cummins,with a 3.55 gears in the axels.Noproblem running 70mph at 2000rpm
http://www.youtube.com/watch?v=XtMT1O6uqvE
http://www.youtube.com/watch?v=HamiXpfOZ1U
http://www.youtube.com/watch?v=XtMT1O6uqvE
http://www.youtube.com/watch?v=HamiXpfOZ1U
#29
Registered User
Join Date: Nov 2005
Location: Land of milk and honey.
Posts: 1,971
Likes: 0
Received 1 Like
on
1 Post
I found an 86 D100 that the chassis is perfect on. I would like to swap a 1990 non/ic that I have into.
Went to look at the D100 today, It has a different front clip.
1. Would I swap the clip from the cummins truck into the D100 or fabricate new motor mounts on the D100 clip?
2. The D100 coil springs look weak, If I do leave the old clip, will the heavier springs fit the D100 clip?
3. Can the top A-Arm stay on the D100 chassis?
Thanks!
Went to look at the D100 today, It has a different front clip.
1. Would I swap the clip from the cummins truck into the D100 or fabricate new motor mounts on the D100 clip?
2. The D100 coil springs look weak, If I do leave the old clip, will the heavier springs fit the D100 clip?
3. Can the top A-Arm stay on the D100 chassis?
Thanks!