aluminum dually wheels
03-06-2010, 04:09 PM
#1
Registered User
Thread Starter
Join Date: Apr 2007
Location: Southern New Jersey
Posts: 4,062
Likes: 0
Received 0 Likes
on
0 Posts
aluminum dually wheels
I found a used set of alcoa aluminum dually wheels today. the guy says the lug patern is 8 x 6.5. Will they fit my truck he says they fit ford and dodge.
03-06-2010, 07:54 PM
#3
Registered User
Join Date: Jan 2007
Location: Kalispell, MT
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
yes they will at that bolt pattern. Just be sure the center hole is big enough to fit over your axle. I've seen ford wheels that were too small in the center
03-06-2010, 08:06 PM
#4
Registered User
How much are they? If you dont buy them please let me know, I am looking for a set? I was just in NJ today. How do you guys live up there
I went to a town called Blairstown, my garmen wouldnt even take me to the street address due to it saying not found! Niether would map quest or rand mcnally.com. Its like southern WV up there. Not even a Wal Mart within a 45 min ride!!!!
I went to a town called Blairstown, my garmen wouldnt even take me to the street address due to it saying not found! Niether would map quest or rand mcnally.com. Its like southern WV up there. Not even a Wal Mart within a 45 min ride!!!!
03-06-2010, 09:20 PM
#5
Registered User
Thread Starter
Join Date: Apr 2007
Location: Southern New Jersey
Posts: 4,062
Likes: 0
Received 0 Likes
on
0 Posts
Yea nj sucks I know that. I went and looked at the wheels tonight. They werent bad but the one rear wheel was run loose and egged out the lug holes. I made him an offer and he said he will get back to me. I hope he does take my offer then I will just need to buy one new one.
03-06-2010, 09:23 PM
#6
Registered User
Thread Starter
Join Date: Apr 2007
Location: Southern New Jersey
Posts: 4,062
Likes: 0
Received 0 Likes
on
0 Posts
Blairstown is way up in north jersey I am in south jersey its kinda like 2 different states. I am not to far from atlantic city. What brought you to NJ???
03-07-2010, 09:55 AM
#7
Registered User
I bought a 12 ton eager beaver trailer. I got a really good deal on it. I was worried it may be a little to heavy for my dually at first, but I was barely touching the back overload pads. I wanted a trailer heavy enough to haul anything I could load on it. I get 6 to 8 tons of wood pellets every summer when they are the cheapest for my parents and I. I haul Crown fork lifts from work to scrape. And I wanted a trailer heavy enough to haul my dads Case 580 CK.
Trending Topics
03-07-2010, 10:13 AM
#8
Registered User
03-07-2010, 10:21 AM
#9
Registered User
Thread Starter
Join Date: Apr 2007
Location: Southern New Jersey
Posts: 4,062
Likes: 0
Received 0 Likes
on
0 Posts
I bought a 12 ton eager beaver trailer. I got a really good deal on it. I was worried it may be a little to heavy for my dually at first, but I was barely touching the back overload pads. I wanted a trailer heavy enough to haul anything I could load on it. I get 6 to 8 tons of wood pellets every summer when they are the cheapest for my parents and I. I haul Crown fork lifts from work to scrape. And I wanted a trailer heavy enough to haul my dads Case 580 CK.
03-07-2010, 02:27 PM
#10
Registered User
I have had his 3 axle lowboy loaded with 8ton of wood pellets. That was alot for my dually! I have hauled crown sc forklifts from work in the bed of my truck on 4 seperate occasions. Each time I had 7k in the bed. Thats as close as I have seen my rubber bumps almost touching!
03-07-2010, 09:20 PM
#12
wow I wonder if your bed is tweaked now...
Thread
Thread Starter
Forum
Replies
Last Post
Chip
3rd Generation Ram - Non Drivetrain - All Years
19
04-01-2010 07:53 AM
Spooler
3rd Generation Ram - Non Drivetrain - All Years
4
02-10-2006 05:58 PM
i-bleed-disel
3rd Gen High Performance and Accessories (5.9L Only)
17
03-13-2005 11:13 AM
j28s
Performance and Accessories 2nd gen only
12
09-29-2003 02:26 PM