93 w250 keeps dying and blows out alought of white smoke
#16
Registered User
Fuel that sits will absorb a lot of water also. Remove the tank and drain it. Pour a couple gallons of acetone in the tank and slosh it around for a good hour. The contents you pour out will be nasty. Your next couple of fill ups add a couple cans of SeaFoam or Chemtool to help strip the crud out of the rest of the system.
#17
Don't run any trans fluid through your new injectors, VERY bad for your engine. It does not burn and it has lots of friction modifiers in it that it did not have 20 years ago when some of the old timers thought it was a good thing to do.
Might as well toss a handful of silica powder in your injection system and watch it grind away.
Might as well toss a handful of silica powder in your injection system and watch it grind away.
Thread
Thread Starter
Forum
Replies
Last Post
sleeperman
3rd Gen High Performance and Accessories (6.7L Only)
1
03-08-2011 02:56 PM
joe_yba
3rd Gen Engine and Drivetrain -> 2003-2007
3
06-10-2007 06:49 PM