92 W250 "low" budget remodel....
#31
Registered User
Thread Starter
Join Date: Sep 2009
Location: Idaho
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
I paid 400 for my 4'' skyjacker fronts and 300? for 6'' rear springs (W/2.5'') block. 50 apiece for rancho 5000's and another 70-80 for a raised steering block. I dont remember how much u bolts were. This was a little over 2 yrs ago also. I ordered springs from the net, the rest I sourced locally. Installed all myself w/no powertools. took 2 days
92 smokin....the Borgeson shaft I got just extends to where you want it.......my rag joint seemed to be fine...just finished installing it, it was pretty easy...a buddy of mine helped me...drove it home from Boise, 30 miles on the interstate....night & day difference.....had to adjust the angle on the driveline, shemmed it by the carrier bearing....not sure if single cabs have carrier bearings....might be different for your truck....love it, drives great, looks great!
#33
Registered User
Thread Starter
Join Date: Sep 2009
Location: Idaho
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
That's awesome! My truck is pretty dang rusty, don't have the tools or time to do it....it might be alot but she's done right and I don't have to worry about it.
92 smokin....the Borgeson shaft I got just extends to where you want it.......my rag joint seemed to be fine...just finished installing it, it was pretty easy...a buddy of mine helped me...drove it home from Boise, 30 miles on the interstate....night & day difference.....had to adjust the angle on the driveline, shemmed it by the carrier bearing....not sure if single cabs have carrier bearings....might be different for your truck....love it, drives great, looks great!
92 smokin....the Borgeson shaft I got just extends to where you want it.......my rag joint seemed to be fine...just finished installing it, it was pretty easy...a buddy of mine helped me...drove it home from Boise, 30 miles on the interstate....night & day difference.....had to adjust the angle on the driveline, shemmed it by the carrier bearing....not sure if single cabs have carrier bearings....might be different for your truck....love it, drives great, looks great!
#35
Registered User
Thread Starter
Join Date: Sep 2009
Location: Idaho
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Headache rack pics....
Okay fellas, here's my new headache rack....got her all welded up tonight and sat her on the truck to see how she looks....I'm lovin' it. My buddy and I spent the last few nights puttin' this all together. I'll take it off in the morning and grind, polish, then prime and paint. Its super beefy and super stout
Next week I'll add on a little cubby to protect the t-pipe for the stacks....I'll put some pics up tommorow after she's painted black.
Next week I'll add on a little cubby to protect the t-pipe for the stacks....I'll put some pics up tommorow after she's painted black.
#40
Registered User
Thread Starter
Join Date: Sep 2009
Location: Idaho
Posts: 466
Likes: 0
Received 0 Likes
on
0 Posts
Almost put 37's on today...couldn't do it...need gauges...and probably bump up to 4:10's before I put those monsters on...it looked so stinking good though
Thread
Thread Starter
Forum
Replies
Last Post