500hp Reached!!!!!!!!!!
#16
Registered User
Join Date: May 2003
Location: Longview, WA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
THe hx40 has a 4" outlet into the exhaust system while the HX35 has a 3". I think that is the restriction Don is talking about.
Then again, I think Jeremy had a HX-40 with an adapter plate mounted so he could use his exhaust brake. Essentially, he was running an HX-40 with only a 3" outlet. Jeremy, please correct me if I heard incorrectly on this!
Carl
Then again, I think Jeremy had a HX-40 with an adapter plate mounted so he could use his exhaust brake. Essentially, he was running an HX-40 with only a 3" outlet. Jeremy, please correct me if I heard incorrectly on this!
Carl
#17
DTR Advertiser
NO, the 16 on the 35 and the 40 are different in flow rates. The wheel size of the 40 gives it the extra flow of gas VS the 35 and the 16 for the 35 is also smaller and has a higher restriction.
The 35 drives much nicer IMO though.
The injectors were pretty large prototypes. There is more power to be found too
Don~
The 35 drives much nicer IMO though.
The injectors were pretty large prototypes. There is more power to be found too
Don~
#18
Registered User
Thread Starter
Join Date: Jan 2004
Location: Ca
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
So what about the "Rumered WEAKNESS" of the Shaft on the 40? I love my PDR 35 but I can hit over 1350 WAY TO EASY when I'm pulling my trailer It run's a little cooler when I run the 18 housing though.. and I get more Top end with the bigger housing..But if I could get to 400 with a 40.. that would SURE BE FUN!!
#19
Registered User
Join Date: Jan 2004
Location: Eureka,CA
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
DRUGS
To all that say you are not impressed because I got 520 on drugs. Who cares I still walked away with the plack. I am not trying to be sarcastic, but it seems like no one wants to give me any credit. Except for a few of you and thank you very much. Next time it will be a different story. There is alot of things in the works for the old girl.
If I took my propane kit off along with the water/meth and put it in the Pay it forward forum I am sure allot of you would want to try it out and then put it on the dyno and say look how much Horse Power I have now. HA Ha Ha.
Don’t knock it till you try it.
Old Smokey I want to personally congratulate him he has a real nice set up. I am sure he will knock me off my pedestal.
And to all that wanted to know yes I have an HX40 necked down to 3" to fit my pac brake. I am sure that will change soon I will need the room if you know what I mean!!!!!!!!!
Stomp
If I took my propane kit off along with the water/meth and put it in the Pay it forward forum I am sure allot of you would want to try it out and then put it on the dyno and say look how much Horse Power I have now. HA Ha Ha.
Don’t knock it till you try it.
Old Smokey I want to personally congratulate him he has a real nice set up. I am sure he will knock me off my pedestal.
And to all that wanted to know yes I have an HX40 necked down to 3" to fit my pac brake. I am sure that will change soon I will need the room if you know what I mean!!!!!!!!!
Stomp
#20
Patron Saint of 1st gens
Join Date: Jun 2002
Location: British Columbia, Canada
Posts: 1,107
Likes: 0
Received 0 Likes
on
0 Posts
Hey Stomp.... just flat out AWESOME DUDE !!!!!
Keep kickin at the barrier and give us all a bar to shoot for bud... good on ya.
BTW... Stomp took the "Extreme HP Award"... top notch work !!
pastor bob.....
Keep kickin at the barrier and give us all a bar to shoot for bud... good on ya.
BTW... Stomp took the "Extreme HP Award"... top notch work !!
pastor bob.....
#21
Re: DRUGS
Originally posted by Stomp
To all that say you are not impressed because I got 520 on drugs.
To all that say you are not impressed because I got 520 on drugs.
#23
Registered User
Join Date: Jan 2004
Location: Eureka,CA
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
600HP project.
Hey thanks guys I was just venting. Now that being said there are things in the works, but I am not shooting for 500 its 600hp plus to the rear wheels.
I found the turbo's this morning and all I need to do is say the word and the word is NOW!!!!!!!!!!!!!
I have a few people on my list to make this project happen. Any one else want to jump on is fine by me.
Stomp
I found the turbo's this morning and all I need to do is say the word and the word is NOW!!!!!!!!!!!!!
I have a few people on my list to make this project happen. Any one else want to jump on is fine by me.
Stomp
#24
Registered User
Join Date: May 2003
Location: Longview, WA
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Hey Stomp, now that your going for 600, you're going to need bigger injectors. I'll go ahead and throw your old ones away for you after I confirm there is no hazardous residue left on them (I work in a lab). I know how tough those screwy CA regs are on that stuff so I'm glad to help out.
Just send them to me at this address"
Carl Degner
c/o CAS
...
Stop so hard!
Carl
Just send them to me at this address"
Carl Degner
c/o CAS
...
Stop so hard!
Carl
#25
I was banned per my own request for speaking the name Pelosi
Join Date: Aug 2002
Location: Bristol Michigan
Posts: 1,908
Likes: 0
Received 0 Likes
on
0 Posts
When you get a chance, how about adding some pictures. Couple under the hood, in the cab, etc.
Thanks,
Don
Thanks,
Don
#26
Registered User
Join Date: Jan 2004
Location: Eureka,CA
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
Carl
You know I think I will see how far I can take these injectors before I try some new ones. Thanks for the offer if I do change them out I will let you know.
I am in the process of getting some more pics of my Junk Yard Dog pickup, and should have them up in the next couple of days. Also when I start my BUST project I will try to take pictures of the extra parts going under the hood.
If you didnt know what BUST stands for its:
(Blow Up Stomps Truck.)
Stomp
I am in the process of getting some more pics of my Junk Yard Dog pickup, and should have them up in the next couple of days. Also when I start my BUST project I will try to take pictures of the extra parts going under the hood.
If you didnt know what BUST stands for its:
(Blow Up Stomps Truck.)
Stomp
Thread
Thread Starter
Forum
Replies
Last Post
06RAM2500
3rd Gen Engine and Drivetrain -> 2003-2007
7
01-05-2010 01:45 PM