2nd gen seat in a first gen
#1
Registered User
Thread Starter
Join Date: May 2002
Location: SE USA
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
2nd gen seat in a first gen
Who has done this and what's involved?<br>It is definitely NOT an "Easy bolt in swap".<br>Any pictures would be appreciated.<br>I have 40% of the 40/20/40 seat installed until I can figure out the right way to do it.<br><br>Thanks again,<br>Stevie G
#4
Chapter President
Re:2nd gen seat in a first gen
I've only done the rear bench from a 2nd gen.. The fronts in mine are aftermarket.
The photo I attached is from in my 89, but the same seats are in my 93...
J-eh
The photo I attached is from in my 89, but the same seats are in my 93...
J-eh
#5
Registered User
Join Date: May 2002
Location: Northwest
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Re:2nd gen seat in a first gen
I put Sundancer seats in my 93 STD Cab before I traded in it. They fit below the bump at the rear window allowing them to go back far enough for my 6'3" body. The pattern cloth was the same as the trucks cab. Only slightly different shade or they were slightly faded. Paid $40 for the pair at wrecking yard. use 1" square tubing to get them at the right height. Two in front one in back if I remember correctly. Chris
Thread
Thread Starter
Forum
Replies
Last Post