ryan10

Ok, so those are all the fittings i will need to go from the LP outlet to the inlet on the fuel filter, then the outlet on the fuel filter to the inlet on the injector pump. Also, i want to add in a regulator for 15 psi. What fittings will i need to do this? Also, will i need any special lines to go from the return line on the pump to the regulator? How are you guys doing the return lines? do they run from the IP all the way back to the tank? is there any way to do this without running the big line all the way back to the tank for the return line.

ofcmarc

The regulator can be plumbed i with a couple hose clamps on the fuel line between th filter and IP.

Return line could be either all the way back to the tank or T into the stock return somewhere.

ryan10

ok, i plan to T back into the stock return. Should i do it right after the regulator? whats the best way to T back into the metal line?
thanks for the help

ofcmarc

I think there is a soft return line at the back of the head.