1ST Gen tranny/2nd Gen Motor
#1
Registered User
Thread Starter
Join Date: Sep 2007
Location: Tennessee
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
1ST Gen tranny/2nd Gen Motor
I recently bought a clean 96 6BT for a project truck i am building. My question is. My buddy bought a 92 250 4x4 with an automatic. Could i use that auto out of the 92 to mount up to my 96 6BT? I thought i was reading about they changed something in 94 and the tranny's would not interchange. I'm sure that i am wrong though. Please inlighten me on this subject.
#2
Registered User
Join Date: Nov 2001
Location: tennessee
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
if you use 92 engine plate, starter and converter it will bolt up. throttle pressure linkage for 96 should work. got the 727 bolted to my 97 but used manual valvebody to do away with linkage.
Thread
Thread Starter
Forum
Replies
Last Post
BRUISER
1st Gen. Ram - All Topics
11
02-02-2015 11:25 AM
redwake9112
1st Gen. Ram - All Topics
2
09-03-2007 11:35 AM
GR40RCapri
12 Valve Engine and Drivetrain
14
11-15-2006 04:18 PM