1st gen pics anyone?
10-26-2009, 04:26 PM
#901
Registered User
It was for a 91 Dodge, so everything fit decently, the pipe from the intake manifold to the intercooler seems like it should be like 1/2" longer to fit better but seems ok as it is.
10-26-2009, 08:04 PM
#902
Registered User
Join Date: Jan 2008
Location: Quinton, New Jersey (middle of nowhere)
Posts: 7,547
Likes: 0
Received 2 Likes
on
2 Posts
it was the special kit to put an I/C in a 91.0 non i/c truck, different from the kit to put it in a 89-90 truck....it is a rare peice. my dad sold it to him.
11-02-2009, 12:27 PM
#906
Administrator
Here´s mine
She´s not a show vehicle, but gets me to Mexico and back. These pics taken about a half hour ago....Sorry for you guys suffering in the cold...about 80 degrees today. Pics taken in Kino Bay Mexico...Quč les vayan bien...Mark
Last edited by maybe368; 11-02-2009 at 02:43 PM. Reason: Spelling
11-02-2009, 02:42 PM
#909
Administrator
Thanks guys, there is also alot of corona here tooo.....
11-04-2009, 08:01 AM
#911
Registered User
Join Date: Mar 2008
Location: Hampton, VA.
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
11-04-2009, 09:02 AM
#912
Administrator
Thanks, it is actually a warn bumper for a chevy, I cut the ends off so it would fit. I couldn't find one reasonably priced for a Dodge. As I recall a new one for a Dodge was over 1000 dollars and I just couldn't find any used ones for a Dodge. It must be because you guys keep these great trunks on the road and when one does go belly up, it's parts get reabsorbed into other Dodges so fast that you have to be one of the first to get to it...
I called about 10 local wrecking yards and could not find one truck that had not already been stripped of it's usable parts...Mark
I called about 10 local wrecking yards and could not find one truck that had not already been stripped of it's usable parts...Mark
11-04-2009, 10:15 AM
#913
Administrator
Here's a couple more pics
I thought I would post a couple more pics of some of the changes I made to the truck. The original bench seat was going to cripple me, so I installed this one, It is actually a generic seat that is flat all the way across the bottom. The difference is the mounting is for a Dodge. The toolbox/fuel tank is 91 gallons and I built a stand for is so that I would not completely lose my bed.It gives me around 2500 miles between fillups 
..Mark
..Mark
