1990 D250 to W250
#916
Registered User
Thread Starter
Hey, Mark, when you do the king pins on your project lets do another get together, ok. I'd like to watch n learn if you know what I mean.
My assistance will be limited; that's all dependent on how far out you plan on doing this, as I am sorta still in the healing stages. The farther out you put the king pins out, the more of an assistance I can be.
But whenever you decide to do them, pm or call.
Thanks, neighbor
My assistance will be limited; that's all dependent on how far out you plan on doing this, as I am sorta still in the healing stages. The farther out you put the king pins out, the more of an assistance I can be.
But whenever you decide to do them, pm or call.
Thanks, neighbor
#917
Registered User
Thread Starter
#918
Registered User
Join Date: Dec 2010
Location: Land of the Toxic Avenger
Posts: 6,789
Received 1,647 Likes
on
1,120 Posts
You just want to see his pile of stuff to go through.....
Like some other people we know...
#919
Registered User
Thread Starter
here we go again Saturday is my birthday so my wife wants to try and hunt down a birdbath hood for my truck. there are potential subjects at 3 different Pick N pull yards so maybe this time
#920
Very nice. Don't forget to get the upper Grille, and wiper posts as well to make the full conversion.
The following users liked this post:
mknittle (03-16-2016)
#921
Registered User
Thread Starter
#922
Registered User
Thread Starter
Today I did some more plumbing on my HB. I am still trying to decide how I am going to do the return line for the steering gear. I would like to do the dual line reservoir. Anyway here are some pictures.The big loop in the bottom of the return line will be shortened. I just stuck it on there to keep crapola out.
#923
Registered User
Thread Starter
I saw this one today on a search for bird bath hood.Pretty nice looking.I have been thinking about that style grille lately. maybe If i see a good one at PnP I will grab it.
#925
Registered User
Thread Starter
The following users liked this post:
thrashingcows (03-18-2016)
#926
Registered User
Thread Starter
Looking at my pictures that thing needs a bath
#927
Registered User
Thread Starter
I managed to get a good cowl vent cover for a bird bath hood today. I think it was the only good part left on the truck. It must have been somebody's parts truck. there were a bunch of parts missing and a bunch of mismatched junk parts in the the unbolted bent bed.
#928
Registered User
Thread Starter
I am exhausted. Did some trimming on the original hanger and welded a strap on the tailpipe. trimmed that a little too