1990 D250 to W250
#751
Registered User
Thread Starter
And did you catch this?
https://www.pegasusautoracing.com/pr...p?Product=3259
https://www.pegasusautoracing.com/pr...p?Product=3259
#752
Registered User
Join Date: Apr 2006
Location: granite falls washington
Posts: 840
Likes: 0
Received 1 Like
on
1 Post
And did you catch this?
https://www.pegasusautoracing.com/pr...p?Product=3259
https://www.pegasusautoracing.com/pr...p?Product=3259
I did see them local Ill more than likely need one of those welded on the PW hose (GB end).
Reason this guy http://www.summitracing.com/parts/aer-fbm1392 looks a little tight or id have to point it forward and have a big bend in the hose.
I could also put them on the 99 steel lines also.
#753
Registered User
Thread Starter
I started on the brackets for the front brake hard lines meet the hoses that go to the calipers.
#754
Hey did you try service radiator at all off of Lincoln ave? They will build you custom ss braided brake lines and the associated connectors
#755
Registered User
Thread Starter
Thanks Augie.
#756
Registered User
Thread Starter
Well, Today I made this contraption. any guesses? Brian probably knows
The welds re pretty ugly because they are just spot welds. I was too lazy to adjust toe voltage and wire speeds
The welds re pretty ugly because they are just spot welds. I was too lazy to adjust toe voltage and wire speeds
#758
Registered User
Thread Starter
#761
Registered User
Cheers!
Mike
#763
Registered User
Thread Starter
#764
Registered User
Thread Starter
I knew Bob and Brian would know what it is Otherwise that one came out of the clear blue sky. I haven't mentioned working on a hydroboost setup much on this thread.
#765
Registered User
Thread Starter