1990 D250 to W250
#31
Registered User
Isn't that a Banks unit? I got a two pod years ago from Geno's. Now I'd like a 3-pod but can't find one anywhere. I have a 4-pod top but no base. Sure wish somebody would make these again...
#34
Registered User
Thread Starter
The gauges have RW products printed on the faces. I bought them from a guy new still in the box after he totaled his truck so I don't know where the originally came from. Wish I did though.
#35
Registered User
Thread Starter
#36
Registered User
Thread Starter
While everything major is on hold I have been collecting little stuff.
I got this off a reconditioned cummins after cooler for an NTC400 I thought it would make a good dash plaque.
I got this off a reconditioned cummins after cooler for an NTC400 I thought it would make a good dash plaque.
#38
Registered User
Thread Starter
#39
Registered User
Thread Starter
It was raining yesterday so a drew up some front spring hangers.
I posted a picture in another thread post #22
https://www.dieseltruckresource.com/...t316652p2.html
I posted a picture in another thread post #22
https://www.dieseltruckresource.com/...t316652p2.html
The following users liked this post:
Dan s (03-16-2017)
#40
Registered User
Thread Starter
I finished cutting my front spring hanger brace out.
#42
Registered User
Thread Starter
#43
Registered User
I like that you're making your own parts! I prefer to make my own parts when I can as well. Been making some custom one off parts for Harleys for the past year. Right now I'm working on making a couple items for our trucks and I'll share what I come up with when I'm done.
#44
Registered User
Thread Starter
That looked like it was laser cut, you did a good job keeping everything symmetric.
I like that you're making your own parts! I prefer to make my own parts when I can as well. Been making some custom one off parts for Harleys for the past year. Right now I'm working on making a couple items for our trucks and I'll share what I come up with when I'm done.
I like that you're making your own parts! I prefer to make my own parts when I can as well. Been making some custom one off parts for Harleys for the past year. Right now I'm working on making a couple items for our trucks and I'll share what I come up with when I'm done.
I like to make everything I can. It sounds like you know how that is. I am looking forward to seeing what you come up with.
#45
Registered User
I like to make stuff as well...I wish I had more room so I could get me a plasma cutter...drill press...small milling machine...etc. But I do what I can with my limited space and tools.