1st Gen. Ram - All Topics Discussion for all Dodge Rams prior to 1994. This includes engine, drivetrain and non-drivetrain discussions. Anything prior to 1994 should go in here.

14 or 16 exhaust housing with 60 mm upgrade

Thread Tools
 
Search this Thread
 
Old 05-10-2013, 10:07 AM
  #1  
Registered User
Thread Starter
 
Bg enemy's Avatar
 
Join Date: Nov 2012
Location: Mineral wells Texas
Posts: 79
Likes: 0
Received 0 Likes on 0 Posts
14 or 16 exhaust housing with 60 mm upgrade

Well auto to manual swap is done now time to add some power going to upgrade the turbo first since the stock turbo lags so bad going to get the 60 mm wheel up grade but don't know what exhaust housing to get any thoughts or suggestions
Old 05-10-2013, 11:53 AM
  #2  
Registered User
 
BILTIT's Avatar
 
Join Date: Nov 2010
Location: Lloydminster SK/AB
Posts: 2,202
Received 9 Likes on 9 Posts
With a manual use a 12 or 14 or put on a 351cw, gets you both the 60mm and small housing in one.
Old 05-10-2013, 04:15 PM
  #3  
Registered User
 
crewcabxlt's Avatar
 
Join Date: Nov 2007
Location: northern utah
Posts: 571
Likes: 0
Received 0 Likes on 0 Posts
x2 on the 12, better and cheaper to get,
Old 05-10-2013, 04:25 PM
  #4  
Registered User
 
mhuppertz's Avatar
 
Join Date: Sep 2004
Location: Tijeras, New Mexico, 7,000ft up
Posts: 4,013
Received 127 Likes on 71 Posts
The 14 may be a really good balance between low end power and high end punch, but the 16 is a complete beast with a 60mm the mid and upper ranges.
Old 05-10-2013, 06:10 PM
  #5  
Registered User
 
jimbo486's Avatar
 
Join Date: Mar 2008
Location: Orange County, California
Posts: 4,389
Received 114 Likes on 80 Posts
The 14cm on my Super 40/35 hybrid spools great! Not too choked out up top and good on the bottom. Although, the 12cm is cheaper.
Old 05-10-2013, 07:12 PM
  #6  
Registered User
Thread Starter
 
Bg enemy's Avatar
 
Join Date: Nov 2012
Location: Mineral wells Texas
Posts: 79
Likes: 0
Received 0 Likes on 0 Posts
What would the 12 due to egts when pulling
Old 05-10-2013, 09:38 PM
  #7  
Registered User
 
Terraizer's Avatar
 
Join Date: Dec 2005
Location: Penrose Colorado
Posts: 137
Likes: 0
Received 0 Likes on 0 Posts
When i went GDS 60MM i also installed a gated 14CM BD exhaust housing. It spools fast and cools really well, EGT's are cooler then with stock compressor and 18.5 housing.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cowboyup007
1st Gen. Ram - All Topics
14
08-17-2011 04:34 PM
autocar56
1st Gen. Ram - All Topics
7
07-21-2011 06:34 PM
dkimmel
3rd Gen High Performance and Accessories (5.9L Only)
11
08-20-2010 09:46 PM
95black2615
12 Valve Engine and Drivetrain
5
07-21-2005 09:06 PM
HOHN
Performance and Accessories 2nd gen only
12
12-07-2003 02:07 PM



Quick Reply: 14 or 16 exhaust housing with 60 mm upgrade



All times are GMT -5. The time now is 12:53 PM.