1st Gen Motor Mount ID
#1
Registered User
Thread Starter
1st Gen Motor Mount ID
The one on the left is the good one from Auto Zone. The middle is a stock, shreadded mound, and the right is the NAPA part. The Anchor mount has the same thickness as the good stock unit but has rubber molded into all the weight bearing surfaces.
Mark
Mark
#3
Registered User
Thread Starter
#6
Registered User
Join Date: Aug 2006
Location: Sioux Falls, South Dakota
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Registered User
Join Date: Feb 2007
Location: Pen Argyl Pennsylvania
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
I bought mine from Rock Auto .com
Motor mounts part #131 2710 x2 $14.61 ea
Transmission mount #105 2668 x2 $3.09 ea these are the thicker of the 2
#105 2667 x2 $2.82 ea these are the thinner of the 2
All the mounts are Anchor mounts.
Motor mounts part #131 2710 x2 $14.61 ea
Transmission mount #105 2668 x2 $3.09 ea these are the thicker of the 2
#105 2667 x2 $2.82 ea these are the thinner of the 2
All the mounts are Anchor mounts.
#15
Registered User
Join Date: Mar 2006
Location: North Idaho
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
He is also a first genner.
I was the first to violate his '92 pump - It got some timing, gov spring and a lil fuel screw.
Rode in the truck- couldnt tell it had poly bushings in it. Doesnt shake
I was the first to violate his '92 pump - It got some timing, gov spring and a lil fuel screw.
Rode in the truck- couldnt tell it had poly bushings in it. Doesnt shake