Mark this thread as Unsold
Truck For Sale 84 W350 Crew
#1
84 W350 Crew
Info 1984 W350 Crew Cab4x4 Single rear wheel short bed
Set up for 360 (no engine in it now)
NP435 trans
NP205 case
About 9" of lift 6" suspension/3" body)
37" Super Swamper SSR (rears good fronts need replacing) M/T 16x10 wheels
Dana 60 front W4.10
Dana 60 rear with Disc conversion (great lake offroad using Chevy parts)
Custom driveshafts W/1350 joints
Truck Needs Work $3500 W/ All parts, $3000 for truck as it sits
No Engine in it
Drivers floor pan is bad, rear of cab roof on passenger side was dented by a falling tree (I have a section to repair it) doe not interfere with door or show on inside of roof.
Drivers fender rolled & dented will need repair or replacement (have fenders & hood)
Passenger Door crushed vertically in the center still functions fine (have a set of power doors)
I have a 360 I built for the truck that ate a piston (out of spec) but a solid 10:1 360 that can be included for a few bucks more I have the replacement piston)
Set up for 360 (no engine in it now)
NP435 trans
NP205 case
About 9" of lift 6" suspension/3" body)
37" Super Swamper SSR (rears good fronts need replacing) M/T 16x10 wheels
Dana 60 front W4.10
Dana 60 rear with Disc conversion (great lake offroad using Chevy parts)
Custom driveshafts W/1350 joints
Truck Needs Work $3500 W/ All parts, $3000 for truck as it sits
No Engine in it
Drivers floor pan is bad, rear of cab roof on passenger side was dented by a falling tree (I have a section to repair it) doe not interfere with door or show on inside of roof.
Drivers fender rolled & dented will need repair or replacement (have fenders & hood)
Passenger Door crushed vertically in the center still functions fine (have a set of power doors)
I have a 360 I built for the truck that ate a piston (out of spec) but a solid 10:1 360 that can be included for a few bucks more I have the replacement piston)
Thread
Thread Starter
Forum
Replies
Last Post
Buddy Stewert
1st Gen. Ram - All Topics
12
10-28-2010 12:06 AM