plate and/or housing forward
#1
plate and/or housing forward
Ok I'm new to this and I know that this stuff has been talked about forever but bare with me. I read about moving the AFC housing forward and I read about moving the Stock plate forward. Do you do both or what.
Thanks
Ken
Thanks
Ken
#2
Yes you do want to do both.... after you have gauges in the truck. The AFC limits the fuel that the engine gets prior to boosting. After about 6psi of boost then the AFC arm moves forward and the governor arm is allowed to rest on the fuel plate (assuming you're at WFO). At that point the fuel plate is what is preventing the engine from fueling too much and the AFC is doing nothing.
#3
Registered User
Read this http://dieseldatabase.com/read.php?id=58
#6
Registered User
I haven't watched it, tell us what you think.
http://www.youtube.com/watch?v=orRh9s5aavU
http://www.youtube.com/watch?v=orRh9s5aavU
Thread
Thread Starter
Forum
Replies
Last Post
West Coast
Performance and Accessories 2nd gen only
1
07-04-2007 10:25 AM
dma251
Performance and Accessories 2nd gen only
14
05-08-2003 12:48 PM
whiteknight
12 Valve Engine and Drivetrain
13
12-29-2002 08:30 PM