Odd controller behavior/ trans 97 47RE
#1
Registered User
Thread Starter
Join Date: Sep 2004
Location: New Lexington, Ohio
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Odd controller behavior/ trans 97 47RE
This is a stumper. I am working on a 97 47RE trans whth no fourth and no lockup. The odd thing is, I can manually engage the solenoids for fourth and lockup with the scantool (verified by backprobing the connector at the trans, can hear them cycle.)
When driving, the scan tool displays that the controller is requesting fourth and lockup, but it does not actually engage either solenoid. Wierd. I am of a persuasion that something died in the controller, but wanted to bounce it off the esteemed members of this board. Maybe some one has encountered this before. Have been a lurker here a while, never had one stump me like this.
Thanks
Jon
When driving, the scan tool displays that the controller is requesting fourth and lockup, but it does not actually engage either solenoid. Wierd. I am of a persuasion that something died in the controller, but wanted to bounce it off the esteemed members of this board. Maybe some one has encountered this before. Have been a lurker here a while, never had one stump me like this.
Thanks
Jon
#2
Registered User
Join Date: Feb 2002
Location: Sharpsburg KY
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
this is not about your tranny but IC your looking for a 93 2wd Dodge auto. Well I have one I might part with. its in good shape and drives great. It has 185k on it and most of that is over the road miles driveing back and forth to Toledo for school from Cincinnati. its a red and grey reg cab. newer mud tires with great tread left on them. it needs a pass front fender and the hood painted but tother than that its a great truck. shoot me a pricce and I will see if I can let if got for that.
DM01
DM01
Thread
Thread Starter
Forum
Replies
Last Post
jballou
3rd Gen Engine and Drivetrain -> 2003-2007
2
10-23-2007 06:15 PM