np 241 tail shaft housing
#1
Registered User
Thread Starter
Join Date: Mar 2004
Location: Milwaukee area, Wisconsin
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
np 241 tail shaft housing
Why does everything I touch turn to crap? I am going through a rebuild of my tow truck and the next part was the transfer case. No big issues just some seals. Anyway, I start prying on the rear seal (with a seal puller) and sure enough the housing cracks. So my first question is does anyone have one of these lying around? What are my options for replacing it?
There has got to be someone out there that has done a slip yolk eliminator on one of these.
I am looking for the stock 6” tail shaft. It is a ’95 dodge 2500 HD Diesel NP 241.
I know I cross-posted this but I am looking for a easy out on this one.
There has got to be someone out there that has done a slip yolk eliminator on one of these.
I am looking for the stock 6” tail shaft. It is a ’95 dodge 2500 HD Diesel NP 241.
I know I cross-posted this but I am looking for a easy out on this one.
#2
Registered User
Join Date: Mar 2005
Location: Amherst, WI
Posts: 1,146
Likes: 0
Received 0 Likes
on
0 Posts
JB Conversions sells the SYE kit here:
http://www.jbconversions.com/pages/
I plan on doing mine when I pull my tranny.
http://www.jbconversions.com/pages/
I plan on doing mine when I pull my tranny.
#3
Registered User
Thread Starter
Join Date: Mar 2004
Location: Milwaukee area, Wisconsin
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
I know they offer one and I would go that route if I was upping the suspension but what I am looking for is someone that has done the SYE and has the old tail housing laying around.
Thread
Thread Starter
Forum
Replies
Last Post
pcgym
12 Valve Engine and Drivetrain
10
02-15-2010 03:47 PM
ram 2500
24 Valve Engine and Drivetrain
1
12-08-2008 08:07 AM
bluechrome
3rd Gen Engine and Drivetrain -> 2003-2007
5
09-05-2008 12:00 AM