Manual 4x4 tranny bolt to auto xfer case?
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: florida
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Manual 4x4 tranny bolt to auto xfer case?
Will this work? Let me explain. I want a manual tranny for my 96 4x4 12 v. I have a auto. Can I bolt the manual tranny to my auto transfer case without problems or is it too much work.
lewis
lewis
#2
Registered User
Join Date: Mar 2006
Location: Pittsburgh Pa
Posts: 506
Likes: 0
Received 0 Likes
on
0 Posts
It will bolt together fine but you have to change the input gear on the T-Case or get a T-Case from a manual truck. The auto uses a 23 spline out put and the manual uses a 29 spline out put. It isn't hard to change. I just did a auto to NV4500 conversion on my truck. PM me if you need instructions, help, part numbers etc..... Pete
Thread
Thread Starter
Forum
Replies
Last Post
bucknasty
3rd Generation Ram - Non Drivetrain - All Years
8
02-02-2009 08:46 AM
4x4dually
Performance and Accessories 2nd gen only
5
06-20-2006 08:38 AM
ezdemon72
12 Valve Engine and Drivetrain
14
07-29-2005 10:05 AM