Luke's Links ?
#2
Chapter President
I have had them on both of my CTD's with more mileage than I can remember - no issues to date. FWIW, they can be shimmed to keep consistent preload on the joint if wear occurs.
#3
Registered User
I've installed several Luke's since they first came out and have only had one come back that needed readjustment, 30k miles later. It's a good product.
Personally I prefer a lifetime warrantied bar from Napa over a Luke's even though they cost a little more.
Install takes a tenth of the time and no questions asked when exchanging for a new one.
Personally I prefer a lifetime warrantied bar from Napa over a Luke's even though they cost a little more.
Install takes a tenth of the time and no questions asked when exchanging for a new one.
#5
Registered User
Join Date: Nov 2004
Location: Chicago
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
I have put in at least (6) new track bars, Napa, factory and they all still went out. Lukes Link has been in for around 50K, and not a death wobble since.
Keep in mind if your going to do it, you need to start with the factory track bar, there are subtle differences between in and an after market.
If i had to do it again, I would put a Lukes LInk on a brand new factory track bar.
Keep in mind if your going to do it, you need to start with the factory track bar, there are subtle differences between in and an after market.
If i had to do it again, I would put a Lukes LInk on a brand new factory track bar.
#7
Registered User
Join Date: Nov 2004
Location: Chicago
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
to be honest i dont remeber if the original had a zerk or hot, i would certainly hope so, given the application, but i just dont remeber.
Someone will chime in. Or call the guy at Lukes LInk, might even be Luke?
He knows everything about it, very helpfull guy.
Someone will chime in. Or call the guy at Lukes LInk, might even be Luke?
He knows everything about it, very helpfull guy.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post