12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

help me make offer on truck

Thread Tools
 
Search this Thread
 
Old 10-19-2009 | 03:52 PM
  #1  
firstgen250's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 48
Likes: 0
From: greensburg, pa
help me make offer on truck

what is it worth....1996 duelly five speed...141k all stock...truck is from maryland, broke down here in pa..and sat for 5 years...now i got it to fix..and maybe buy, but i cant figure out what to pay...rocker panel is gone...doors need replaced...and the front axle needs replaced cause the rust is so bad...i droped the tank cause the fuel lines were in bad shape...as i put a new lift pump on to make it run i thru some rubber lines to the tank that i just thru in the bed..just to make it run and drive on the farm a little... know i have it running WHAT IS IT WORTH>>>>please help me...i really want this thing...
Old 10-19-2009 | 06:39 PM
  #2  
Bluedually4x4's Avatar
Registered User
 
Joined: Jul 2008
Posts: 281
Likes: 3
From: Twin Falls Idaho
A really rusty dually in really bad shape not much. Probably worth more in parts than whole.
Old 10-19-2009 | 09:21 PM
  #3  
96_12V's Avatar
Registered User
 
Joined: Feb 2004
Posts: 663
Likes: 0
From: Northern Iowa
Truck like that is worth more apart than together.

Make SURE, really, really sure, it has a clean title prior to doing anything with it. To me, it sounds like the truck was stolen, and dumped off when something broke.

I hate to throw water on your dreams, but it's probably just not worth it unless you want to part it out.
Old 10-20-2009 | 11:26 AM
  #4  
firstgen250's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 48
Likes: 0
From: greensburg, pa
the truck belongs to a family member...so i do know some history about it...
Old 10-20-2009 | 11:43 AM
  #5  
smokeyram's Avatar
Registered User
 
Joined: Nov 2004
Posts: 542
Likes: 0
From: Chicago
if you have got it running, probably a couple grand. i have the same truck, and you WILL hook a funnel from your wallet into your toilet on the front end and brake systems, expecially if it sat.
Old 10-20-2009 | 02:16 PM
  #6  
firstgen250's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 48
Likes: 0
From: greensburg, pa
thats what i am worried about...i found another front axle for 600.00
Old 10-20-2009 | 03:22 PM
  #7  
smokeyram's Avatar
Registered User
 
Joined: Nov 2004
Posts: 542
Likes: 0
From: Chicago
not the axel so much , as the track bar, all the steering components, etc
Old 10-20-2009 | 04:41 PM
  #8  
96_12V's Avatar
Registered User
 
Joined: Feb 2004
Posts: 663
Likes: 0
From: Northern Iowa
Originally Posted by firstgen250
the truck belongs to a family member...so i do know some history about it...
That's good...

Read my italic signature line....
Old 10-20-2009 | 06:26 PM
  #9  
firstgen250's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 48
Likes: 0
From: greensburg, pa
o yea i think the rear is shot too...............
Old 10-20-2009 | 10:49 PM
  #10  
Diesel Dave2's Avatar
Pickin on the wrong admin...
 
Joined: Mar 2007
Posts: 3,568
Likes: 1
Post some pics of the truck..
Old 10-22-2009 | 03:52 PM
  #11  
96_12V's Avatar
Registered User
 
Joined: Feb 2004
Posts: 663
Likes: 0
From: Northern Iowa
Originally Posted by firstgen250
o yea i think the rear is shot too...............
Yep - at this point, parting is your best bet.

I would think that getting the engine running would be well worth the while, then get it out and sell that and the transmission. Body parts (even things you might think are not worth anything, could be worth quite a bit.)

May want to do a Google search on parting out a truck to see what is the best way to go about it.

I did, and found this video (which may help you feel better about giving up on a dream... )

http://www.youtube.com/watch?v=GZJj-laICx4
Old 10-23-2009 | 02:55 PM
  #12  
firstgen250's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 48
Likes: 0
From: greensburg, pa
WOW...that video was great...i wish i could get pics of it up on the net...but...i cant..i dont have time to do that...but i want to thank you guys for the ideas, you all have been very helpfull on this DREAM....i quess i will stick with the first gen....
Old 11-02-2009 | 05:02 PM
  #13  
firstgen250's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 48
Likes: 0
From: greensburg, pa
hey guys its been a while on this since we talked...i made a deal with the guy who owns it..we came up with 3000. does that seem a good price
Old 11-02-2009 | 05:13 PM
  #14  
G1625S's Avatar
Registered User
 
Joined: Mar 2004
Posts: 4,767
Likes: 5
From: port crane, NY
not really...given the condition you described, plus the stuff you know it needs, plus the stuff you DON'T know it needs...it's worth what a running p-pump engine is worth, imo. 2k tops.
Old 11-02-2009 | 05:24 PM
  #15  
firstgen250's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 48
Likes: 0
From: greensburg, pa
wow i was sure hoping someone was going to say yes...i figured 3 k for the truck and 3k to get it on the road..thats what i was thinking..i figured 6 k for a 96 dual wheel pickup was good


Quick Reply: help me make offer on truck



All times are GMT -5. The time now is 12:27 PM.