egr delete. need to know what resistor
#1
egr delete. need to know what resistor
hey all, deleted the egr on my truck(98). sick of the cel. found a diagram on here but not sure what exactally i need. looks like a 5 prong relay and a 6k ohm 1/4 watt resistor. radio shack doesnt carry those. just wanted to check and make sure that is what i needed.
thanks in advance
pat
thanks in advance
pat
#4
FP3: Answered your PM today. Don't hesitate to email any questions.
Nate: CA version 96-98 trucks had EGR valves and tubes. Apparently the 97 & 98's also tripped CELs when the tubes were blocked off, (for test purposes), at least my 98 and others did.
Dan
Nate: CA version 96-98 trucks had EGR valves and tubes. Apparently the 97 & 98's also tripped CELs when the tubes were blocked off, (for test purposes), at least my 98 and others did.
Dan
Thread
Thread Starter
Forum
Replies
Last Post
king cotton
3rd Gen High Performance and Accessories (6.7L Only)
2
11-24-2010 10:33 PM
MOJO1
3rd Gen High Performance and Accessories (6.7L Only)
8
08-04-2009 06:28 PM
Red3quarter
3rd Gen Engine and Drivetrain -> 2007 and up
4
11-08-2008 04:11 PM