Axle Seal Again!
06-17-2007 | 08:34 PM
#1
Thread Starter
Registered User
Joined: Jan 2007
Posts: 512
Likes: 0
From: Beavercreek,OH
Axle Seal Again!
What size socket for the makeshift slide hammer (Seal Side)
I have read the one write up the fellow did (DIESELPOWERMAN) He says to use 1-3/4 but in the pic it is 1-11/16????????
The seal is bad 3/4 below fill hole and has leaked for 1 year
I only need 1 puddle in the drive (Blow Down Tube) not 2
Brandon
I have read the one write up the fellow did (DIESELPOWERMAN) He says to use 1-3/4 but in the pic it is 1-11/16????????
The seal is bad 3/4 below fill hole and has leaked for 1 year
I only need 1 puddle in the drive (Blow Down Tube) not 2
Brandon
Thread
Thread Starter
Forum
Replies
Last Post
Steven K
3rd Gen Engine and Drivetrain -> 2007 and up
4
06-04-2009 10:32 AM
dieseljerk
3rd Gen Engine and Drivetrain -> 2003-2007
2
07-08-2004 07:23 AM