Adjusting the star screw
#17
Registered User
Join Date: Feb 2006
Location: Oldenburg, Indiana
Posts: 1,065
Likes: 0
Received 0 Likes
on
0 Posts
If you're fairly easy on it and drive like a sane person the 10 plate should be ok on your clutch. As long as you have a pyro, your eGT's will be fine.
#19
Registered User
Join Date: Feb 2006
Location: Oldenburg, Indiana
Posts: 1,065
Likes: 0
Received 0 Likes
on
0 Posts
#21
Registered User
Alright so I am kind of upset. I pulled off the blug and saw that the screw was almost to the very front of the housing so I can't turn it anymore. The only time this thing smokes is on start-up. Is there something else I need to do to make it smoke? I am going to change the fuel filter tonight in case that might be the problem....Any ideas?
Yes, it looks like the starwheel is too far up but you can still turn it.
All you need is a small flathead screw driver to put in the teeth of the starwheel, turn it towards the engine for more smoke/off the line accleration.
Don't pry on the threads where the 8mm allen head plug screws in.
Thread
Thread Starter
Forum
Replies
Last Post
ofcmarc
1st Gen. Ram - All Topics
6
11-03-2007 01:34 PM
colofred
1st Gen. Ram - All Topics
3
04-22-2007 09:49 AM